DSC Forged carbon damascus - Leopard Skin

Easily make damascus carbon steel knife blades with the DSC© carbon Leopard by Balbach Carbon damascus steel DSC© Leopard pattern by Markus Balbach. A carbon damascus steel with Damascus SuperClean technology: Markus Balbach makes his Damascus in the traditional way, i. e. his Damasc...

More information
Dimensions Stock Price Quantity
Total 0
30 x 2.5 mm ( VENDU AU CM / SOLD BY THE CM ) En stock
€4.30 €3.58  Excl. Tax
30 x 3.2 mm ( VENDU AU CM / SOLD BY THE CM ) En stock
€5.50 €4.58  Excl. Tax
40 x 3 mm (VENDU AU CM / SOLD BY THE CM) En stock
€6.50 €5.42  Excl. Tax
40 x 4.2 mm ( VENDU AU CM / SOLD BY THE CM ) En stock
€8.70 €7.25  Excl. Tax

Technical sheet

Customer reviews

Further information

ShapeFlat
UseBlade
Sub-categoryCarbon
Carbon 0.9 %
Chromium0.3 %
Manganese2 %
Silicium0.2 %
Vanadium0.1 %

DIMENSIONS

Thickness 2.5 mm
Width30 mm

heat treatment

Hardness after tempering 62 (HRC)
Quenching temperature840 C°
Quenching mediaHuile

denominations

Wnr1.2842
AISIO2
AFNOR90MnCrV8

Further information

ShapeFlat
UseBlade
Sub-categoryCarbon
Carbon 0.9 %
Chromium0.3 %
Manganese2 %
Silicium0.2 %
Vanadium0.1 %

DIMENSIONS

Thickness 2.5 mm
Width30 mm

heat treatment

Hardness after tempering 62 (HRC)
Quenching temperature840 C°
Quenching mediaHuile

denominations

Wnr1.2842
AISIO2
AFNOR90MnCrV8

Further information

Carbon 0.9 %
Chromium0.3 %
Manganese2 %
Silicium0.2 %
Vanadium0.1 %

DIMENSIONS

Thickness 3 mm
Width40 mm

heat treatment

Hardness after tempering 62 (HRC)
Quenching temperature840 C°
Quenching mediaHuile

denominations

Wnr1.2842
AISIO2
AFNOR90MnCrV8

Further information

ShapeFlat
UseBlade
Sub-categoryCarbon
Carbon 0.9 %
Chromium0.3 %
Manganese2 %
Silicium0.2 %
Vanadium0.1 %

DIMENSIONS

Thickness 4.2 mm
Width40 mm

heat treatment

Hardness after tempering 62 (HRC)
Quenching temperature840 C°
Quenching mediaHuile

denominations

Wnr1.2842
AISIO2
AFNOR90MnCrV8
Download the technical sheet

Easily make damascus carbon steel knife blades with the DSC© carbon Leopard by Balbach

Carbon damascus steel DSC© Leopard pattern by Markus Balbach.

A carbon damascus steel with Damascus SuperClean technology:

Markus Balbach makes his Damascus in the traditional way, i. e. his Damascus steel is forged by fire. However, it uses an innovative technology that gives its carbon damascus steel a very fine microstructure and avoids impurities. This processing technique will allow this 160-layer Damascus to eliminate the risk of separating the layers when you manufacture your blades. In addition, DSC© carbon damascus steel makes it possible to obtain blades with a good edge hold. Its hardness after heat treatment can reach 62 HRC.

An original Leopard pattern for a unique knife:

Leopard's (Leopardenfell) fur pattern by Markus Balbach is inspired by one of the most effective camouflage outfits to blend into the savannah: that of the leopard. But in your workshops, these ballets of successive fine and delicate lines, then medium, then imposing and spotted, will not play discretion. On the contrary, they will particularly highlight blades of respectable or medium dimensions.

Are you looking for other sizes / patterns?

Do not hesitate to contact us. Possibility to provide you with custom-made bars

Customer reviews

Share your opinion
Secure payment

Opt for our secure 3D secure payment system, Paypal or bank transfer.

Quick delivery

Secure shipping in France in 72H, packaging adapted to the products.

customer service

We are at your disposal at 04 73 51 44 77 Monday to Thursday from 8h to 12h and from 13h30 to 17h and Friday until 16h

day-to-day shipping

For any order placed before 13h your parcel is sent the same day