
POLISHING PASTE No. 130 wood and hard metals.
4 seams cotton POLISHING DISCS for medium hardness and versatile use. With a diameter of 300mm and a standard bore of 35mm, these POLISHING DISCS are designed for use on stationary workshop machines with a polishing paste to be chosen according to the materials worked and the desired r...
More informationUse | Aciers inoxydables, Aciers-fontes, Chrome-Cobalt, Matériaux composites, Aluminium, Laiton, Titane, Métaux précieux |
Sub-category | Disques de polissage |
Material | Coton |
Forme | Ronde |
Thickness | 15 mm |
Diameter | 300 mm |
With a diameter of 300mm and a standard bore of 35mm, these POLISHING DISCS are designed for use on stationary workshop machines with a polishing paste to be chosen according to the materials worked and the desired result.
With a thickness of approximately 15mm, multiple discs can be mounted on the same spindle for large surface treatment and increased productivity.
With 4 concentric seams, these discs are of medium hardness, which makes them a good compromise between unsewn discs for grinding or polishing and high hardness discs (5 seams) for aggressive polishing of scratches or defects on worked materials.
These POLISHING DISCS can perform all polishing processes using the appropriate polishing pastes available in the "Polishing pastes and diamonds" section of our website.
To choose the right polishing paste according to the materials worked on and the desired result, do not hesitate to consult the blog articles of our partner SPAP Soucille where you will also find advice from professionals, particularly in the fields of cutlery, goldsmithing and decoration.
With a diameter of 300mm, these discs can be used at speeds ranging from 1200 rpm to 2600 rpm.
Their large diameter guarantees a long life if used correctly, with adequate polishing pastes and above all without mixing different pastes on the same disc.
Soft polishing is best done at low speed (1200 rpm), while honing or mirror polishing is best done at medium speed (2000 rpm), but always with the right polishing paste.
Pre-polishing of soft materials (copper, aluminium, natural materials, etc.) can be done at high speed with a specific polishing paste.
With a standard thickness of 15mm for a 35mm bore, these 4 seams cotton discs can be mounted in series on a robust shaft of stationary and automatic machines.
The increase in the width of the working area allows the treatment of larger surfaces for a significant gain in productivity.
Copyright 3801 - Reproduction in whole or in part is prohibited without the permission of EUROTECHNI S.A.S.
Opt for our secure 3D secure payment system, Paypal or bank transfer.
Secure shipping in France in 72H, packaging adapted to the products.
We are at your disposal at 04 73 51 44 77 Monday to Thursday from 8h to 12h and from 13h30 to 17h and Friday until 16h
For any order placed before 13h your parcel is sent the same day