novelty

POLISHING PASTE No. 130 wood and hard metals.

GUBOSA WOOD POLISHING PASTE No. 130. This grey-green GUBOSA Wood Polishing Paste No. 130 consists of pumice, a natural mineral abrasive of volcanic origin, mainly silica and alumina, in a balanced mixture of vegetable and mineral fats and waxes. Its use is recommended for polishing woo...

More information

Dimensions	Stock	Price	Quantity
Total		0 €
SMALL - 0.80 KG approx.	En stock	€5.23 €4.36 Excl. Tax	4.360000
LARGE - 1.35 KG approx.	En stock	€7.88 €6.57 Excl. Tax	6.570000

Technical sheet

Customer reviews

dimension

Further information

Use	Aciers inoxydables, Aciers rapides, Aciers trempés, Aciers-fontes, Bois, Titane
Sub-category	Solide
Material	Cire végétale,Graisse végétale,Ponce
Support	Coton,Feutre,Sisal

DIMENSIONS

Thickness	50 mm
Length	200 mm
Width	70 mm

Further information

Use	Aciers inoxydables, Aciers rapides, Aciers trempés, Aciers-fontes, Bois, Titane
Sub-category	Solide
Material	Cire végétale,Graisse végétale,Ponce
Support	Coton,Feutre,Sisal

DIMENSIONS

Thickness	60 mm
Length	320 mm
Width	50 mm

GUBOSA WOOD POLISHING PASTE No. 130.

This grey-green GUBOSA Wood Polishing Paste No. 130 consists of pumice, a natural mineral abrasive of volcanic origin, mainly silica and alumina, in a balanced mixture of vegetable and mineral fats and waxes. Its use is recommended for polishing wood and, thanks to its high cut, for polishing hard metals such as steel or iron to a matt finish.

A very good POLISHING PASTE for ferrous metals and wood.

The cutting qualities of GUBOSA Wood Polishing Paste No. 130 grey-green allow for a satin polish on hard metals. The combination of pumice and vegetable or mineral fats and waxes results in a semi-dry GUBOSA Wood Paste No. 130 which is particularly effective for polishing all types of wood without excessive heating.

For use with cotton, sisal or felt polishing discs.

GUBOSA WOOD POLISHING PASTE No. 130 can be used as an impregnating agent on cotton, sisal or felt polishing discs. When used on compact discs, a polish with a high degree of cut is obtained. The impregnation of the discs is done very simply by applying the GUBOSA Wood Polishing Paste No. 130 directly to the rotating disc, so that the paste melts slightly and is distributed evenly. GUBOSA Wood Polishing Paste No. 130 is a high-performance, low-consumption polishing paste, which reduces the amount of impregnation of the discs to a minimum, thus saving money and ensuring a high level of efficiency.

A balanced mixture of pumice and vegetable and mineral waxes and fats.

GUBOSA WOOD POLISHING PASTE No. 130 is a mixture of natural pumice and alumina with vegetable and mineral fats and waxes.
In accordance with the general health regulations for the manufacture of medical and surgical instruments, GUBOSA Wood Polishing Paste No. 130 contains no animal ingredients.