List of shades of steels and data sheets EUROTECHNI
You asked us, we listened to you! With this list, you can find all our shades of steels on the same page, with bonuses, their main features to help you in your cutlery steel purchase choices.
Carbon steel Special steels Stainless steels Non-ferrous metals Damascus steels Carbon steel
| Shades | AISI | WNR | Description | Main applications | Technical sheet |
| 45si7 | 1.5024 |
Silicon spring steel - very resistant to shocks and flexion |
Utility knife blades / springs |
||
| 56si7 | 1.5026 |
Silicon spring steel - very resistant to shocks and flexion |
Utility knife blades / springs |
||
| Xc45 | 1045 | 1.0503 |
Low carbon steel with good flexing suitability |
Folding knife springs |
|
| T508 |
Excellent compromise between a carbon steel and stainless steel |
Folding knife blades |
|||
| Xc75 | 1075 | 1.1248 |
0.75% polyvalent carbon steel - cold rolled |
Knife blades of all types |
|
| Dnh7 | 1075 | 1.1248 |
Versatile 0.75% carbon steel - hot laminate |
Knife blades of all types |
|
| 80crv2 | L2 | 1.2235 |
Weakly allied carbon steel - shock resistant |
OUTDOOR knife blades |
|
| 90mcv8 | O2 | 1.2842 |
Tool Steel - Wear Resistant / Used for Damascus Forge |
Hunting knives, outdoor |
|
| 100mncrw4 | O1 | 1.2510 |
Tool Steel - Very Wear Resistant and Toughness |
OUTDOOR knives |
|
| Xc100 | 1095 | 1.1274 |
Non-aliay carbon steel for high-stop blades and lines of quench |
Knife blades, cup cabbage, damask |
|
| 100c6 | 52100 | 1.2067 |
Bearing steel with chrome addition |
Utility knives |
|
| C130 | 1.2002 |
Unattached carbon steel with high carbon |
HIGH TERRATIONS |
||
| 135cr3 | W2 | 1.2008 |
High levels of low alloy carbon |
Fixed knives, cabbage cut |
|
| Shirogami 2 |
Very high carbon steel, very pure |
Knives, Cup cabbage, wood scissors |
|||
| CPM Cru-Wear |
High-end tool steel, very wear-resistant, strong hard |
Knives, razors, high hardness limits |
|||
| Chipper Steel | A8mod | 1.2630 |
Strongly alloy, tenacious and wear-resistant tools |
Hunting knives, Bushcraft, Outdoor |
|
| Apexultra |
High-end steel, specially designed for cutlery. Very pure, very high hard. |
Ideal for fine cutting edges |
Special steels
| Shades | Wnr | Description | Main applications | Technical Sheets |
|
|
1.2379 |
Tool Steel, High Carbon Rate: Good Tenacity, Excellent Resistance to Abrasive Wear |
OUTDOOR knives |
|
|
|
Tool steel similar to D2: high hardness and excellent wear resistance |
OUTDOOR knives |
||
|
|
Association of a "hard" steel in the center and a more resilient nuance on the sides |
Knives of all types |
||
|
|
|
Carbon steel with high nickel rate |
Damascus manufacturing |
|
|
|
Combination of stainless steels: dipping with heart, resilient on the flanks | Kitchen knives | ||
|
|
Semi-stainless steel specially designed for cutlery. Very pure, resistance to exceptional corrosion, high long permitted. | Ideal for fine cutting edges. Versatile nuance. | ||
|
|
Central core in SPG2, very pure and strong cut. VG10 steel flanks, good resistance to abrasion and corrosion. |
All types of folding knives, kitchen ... |
Stainless steels
| Shades | AISI | WNR | Other | Description | Main applications | Technical sheet |
| Ma5 | 1.4060 | X356cr16n |
Stainless steel with high chrome content and high hardness |
Knife blades of all types, industrial equipment and cutting tools. |
||
| Z8c17 | 430 | 1.4016 | X6cr17 |
Stainless steel not soaking with very good corrosion resistance |
Platinum, mitters, false pieces |
|
| X20cr13 | 410 | 1.4021 | Z20c13 |
Stainless steel at low carbon levels, good flexing capacity |
Folding knife springs |
|
| X46cr13 | 420 | 1.4034 | Z40c13 |
Corrosion resistance, good polishing skills |
Kitchen knives, table |
|
| X50crmov15 | 420mov | 1.4116 | Z50 |
Good hardness / resistance to corrosion |
Professional knives, cooking |
|
| NitroCut NCV60 | 1.4116n |
Stainless steel with high carbon rates, addition of nitrogen and vanadium, good compromise hardness / corrosion resistance |
Professional knives, cooking |
|||
| Sandvik 12C27M |
Stainless steel with more than 0.5% carbon. Good structure and good cutting. |
Folding knives, table |
||||
| Sandvik 10C28MO2 | 440a | 1.4037 |
Very good corrosion resistance / finest structure in the sandvik range |
Razor blades, table knives, kitchen |
||
| Sandvik 14C28N |
Hardness (57 to 59HRC), Best Report Corrosion Resistance / Sandvik Hardness |
Professional cooking knives |
||||
| T7mo | 440a | 1.4109 |
Extra hard stainless steel |
Professional knives |
||
| Niolox |
Contains niobium, wear-resistant with good toughness and good cutting |
OUTDOOR knives |
||||
| X90crmov18 | 440b | 1.4112 |
Stainless steel shade extra hard |
Outdoor knives and professionals |
||
| N690co |
Composed of cobalt with a very good cutting of the cutting edge and significant hardships |
Hunting knives, tactics |
||||
| Rwl34 |
From the powder metallurgy, composed of molybdenum and vanadium: resistance to significant corrosion and hardships |
Knives of all types |
||||
| M390 |
Very high cutting edge |
OUTDOOR knives |
||||
| Elmax |
Stainless steel from the metallurgy of powders for high resistance blades |
OUTDOOR knives |
||||
| Vanadis 8 extra |
Stainless steel from the metallurgy of powders for high resistance blades |
OUTDOOR knives |
||||
| Vanadis 4 extra |
Stainless steel from the metallurgy of powders for high resistance blades |
OUTDOOR knives |
||||
| SUMINAGASHI VG10 |
Japanese sandwich 67 layers (3 materials - VG10 in the center) |
Kitchen knives |
||||
| X12crs13 |
Stainless steel dip soaked with low rate of carbon and sulfur. Easy to machining, even soaked. |
Ideal for making its screws |
||||
| Nitrobe 77 |
Composed of nitrogen. Very resistant to corrosion with a good cutting of the cutting edge. |
Diving knives, outdoor |
||||
| Nitro-b | 1.4116n | X50crmov15 + no |
Stainless steel with nitrogen, allows to reach high hardships |
All types of blades |
||
| 304l | 304l | 1.4307 |
Non-dipping nuance for aspect pieces and flanks of sandwich steels |
Wins, guards, turntables, sides of steel sandwich |
||
| CPM S45VN |
American steel from powder metallurgy. Excellent cutting edge and corrosion resistance. |
All types of knife blades |
||||
| CPM S90V |
American steel obtained by powders metallurgy. Excellent wear resistance. |
BUSHCRAFT and OUTDOOR knives |
||||
| Böhler N680 |
Extremely resistant to corrosion. Good luck possible. |
Diving knives, tactical, outdoor |
Non-ferrous metals
| Shades | Description | Main applications |
| Pure nickel |
Shiny aspect after polishing, hardness quite low, very resistant to corrosion |
Damascus manufacturing |
| Brass |
Easy to work, little mechanical resistance |
Mitters, guards, turntables |
| Titanium grade 5 - Ta6v |
Alloy titanium with aluminum. Excellent hardness / ductility ratio and very good resistance to fatigue. |
Liner-lock folding springs |
Damascus steels
| Shades | Description | Main applications | Technical sheet |
| Damascus Balbach - Carbon |
Leopard - Boomerang - Pyramid - Wild - Ferus |
Knife blades |
|
| Damascus Balbach - Stainless steel |
Rhombi - Wild |
Knives and jewelery |
|
| Damascus titanium |
Pyramid - Roll - Rose - Waves - Aztek - Futuron |
Appearance pieces |
|
| Mokumé |
Damascus Mailshort, mixing a pure nickel and cupro-aluminum |
Appearance pieces |
|
| Damasteel Ds93x |
Aegir - Bjorkmans Twist - Baldur - Bifrost - Dense Twist - Sparse Twist - Super Dense Twist - Draupner - Grosserosen - Gysinge - Hakkapella - Heimskringla - Hugin - Hymer - Ladder - Munin - Odin's Eye - Odin's Heim - Rose - Thor - Vinland - Loki - Fafnir - Nidhogg - Svavner |
Blades and appearance parts |
|
| Damacore |
DC21R Hugin - DC21R Hakkapella - DC18N Hakkapella - DC18N Rose - DC18N Odin's Eye |
||
| Futuron hardcore | Futuron - Waves - Ladder | Knife blades |
