135Cr3 / 1.2008 / W2
Carbon steel for the manufacture of straight razors, knife blades and hand tools. 135Cr3 is a low alloyed, high-carbon steel commonly used for the manufacture of rasps, files and, more broadly, all sharp tools requiring strength, reliability and hardness. Its very high carbon content (...
More informationTechnical sheet
Customer reviews
Further information
Shape | Flat |
Use | Blade |
Sub-category | Standard |
Carbon | 1.3 % |
Chromium | 0.74 % |
Molybdenum | 0.2 % |
Manganese | 0.35 % |
Silicium | 0.2 % |
Vanadium | 0.08 % |
Nickel | 0.07 % |
DIMENSIONS
Thickness | 3 mm |
Length | 1000 mm |
Width | 40 mm |
heat treatment
Hardness after tempering | 62 (HRC) |
Quenching temperature | 800 C° |
Quenching media | Eau |
denominations
Wnr | 1.2008 |
AFNOR | 135cr3 |
Carbon steel for the manufacture of straight razors, knife blades and hand tools.
135Cr3 is a low alloyed, high-carbon steel commonly used for the manufacture of rasps, files and, more broadly, all sharp tools requiring strength, reliability and hardness. Its very high carbon content (1.3%) allows it to reach high hardnesses, which are essential for this type of highly stressed tooling.
Carbon steel 135Cr3 is perfect for high hardness tools that don't need too much tenacity such as e. g. straight razors. Cutlers also appreciate it because it makes it possible to obtain very marked hardening lines (hamon).
For heat treatment, due to its very low Cr content, water or accelerated oil quenching is recommended.
Available in 6mm, it is mostly for forging but other thicknesses will be available very soon in order to be able to work in stock removal.
Customer reviews

Opt for our secure 3D secure payment system, Paypal or bank transfer.

Secure shipping in France in 72H, packaging adapted to the products.

We are at your disposal at 04 73 51 44 77 Monday to Thursday from 8h to 12h and from 13h30 to 17h and Friday until 16h

For any order placed before 13h your parcel is sent the same day