The new generation of one-piece CARBIDE DRILLS is replacing HSS high-speed steel drills.
With a body made entirely of tungsten carbide, one-piece CARBIDE DRILLS have established themselves for drilling the hardest steels (45 HRC and above) and composite materials, in contrast to carbid...
The new generation of one-piece CARBIDE DRILLS is replacing HSS high-speed steel drills.
With a body made entirely of tungsten carbide, one-piece CARBIDE DRILLS have established themselves for drilling the hardest steels (45 HRC and above) and composite materials, in contrast to carbide-tipped or carbide-tipped drills and HSS high-speed steel drills. Designed for the most modern drilling technologies, they are suitable for high rotational speeds and fast feed rates for improved accuracy and productivity.
A special selection for professional and hobby cutters.
With diameters from5⁄64 " to 9⁄64 ", this range of solid carbide drills is dedicated to both professional and amateur cutlers to facilitate the essential drilling operations for knife assembly and finishing. Thanks to the exceptional performance of these drills, even the hardest materials can be drilled with great precision and without burrs, avoiding the possible inconvenience of overheating. The diameters available correspond to the most common drilling diameters in cutlery for rivet or screw assembly or for inserting spacers or pins.
Drilling depth for solid machining.
With superior performance to HSS drills, B200 K10F solid CARBIDE DRILLS can be used for precision drilling of heat resistant steels to depths of up to 5d, and beyond for other steels (5d = 5 times the drill diameter). Softer materials and composites can be machined without the need for a maximum depth rule.
Copyright 3801 - Reproduction in whole or in part without permission from EUROTECHNI S.A.S. is prohibited.
